CAESAR
Ref: 3D Philippe G.

Modèle, texte et photos Didier Lecru

For the English version please scroll down

Je tiens dans un premier temps à remercier vivement Philippe G sans qui ce modèle du Caesar n'aurait jamais pu voir le jour.

Historique

Ce camion équipé d'un système d'artillerie appelé communément CAESAR est un canon automoteur français opérationnel au sein de l'Armée de Terre depuis 2000. Il remplace ou a remplacé petit à petit l'AMX30 AUF1. Le canon d'un calibre de 155 mm mesure 8 m de long. Ce dernier est installé sur la caisse arrière du camion. Largement exporté dans de nombreux pays de l'OTAN, il fait partie de l'aide militaire à l'Ukraine dans le conflit russo-ukrainien déclenché en 2022. L'entreprise KNDS fabrique cet engin.  Apparemment, 473 unités ont été fabriquées en version 6x6 mais aussi 8x8.

La maquette

La maquette est une création personnelle de Philippe G qui m'a fait découvrir la 3D. La résine 3D est plus sensible que le plastique voire cassante si l'on insiste un peu trop.  A mon humble avis, je déconseille vivement une maquette 3D pour  un débutant.

En pièces détachées, ce kit nécessite une certaine réflexion avant tout montage. Philippe a eu la bonne idée d'ajouter à son kit le surblindage de la caisse. Il faut préciser que les pièces sont très fines et précises. Certains détails sont impossibles à créer à la main. Quant à la colle, la cyanolite est très utile. En cas de doute, j'utilisais la colle à bois pour établir une sorte de montage à blanc qui se retirait à l'eau tiède ne laissant aucune trace.

J'ai tenté un antidérapant qui est à mon goût trop  marqué. Je pense avoir installé toutes les durites. Pour les intéressés, Phillipe G. m'a indiqué que ses dernières créations sont pourvues de toutes leurs durites. Pour peaufiner, j'ai ajouté quelques obus issus du kit MENG  AMX30 AUF1.

La peinture

Pour sortir des sentiers battus, je me suis inspiré du camouflage "Sable et Chocolat" du Caesar alors que celui-ci se trouvait aux Emirats Arabes Unis à l'occasion d'exercices militaires. Après avoir bien nettoyé le kit à l'eau tiède additionnée d'un dégraissant, j'ai appliqué un apprêt uniformisant la maquette. Ensuite, j'ai procédé au pré-ombrage que vous connaissez tous en appliquant du blanc recouvert dans les creux de noir. Il aurait été possible d'utiliser du marron. A l'issue, j'ai appliqué du "Flat earth" en effectuant des nuances avec le "Desert Yellow". Quant au coloris marron, j'ai agi de la même sorte avec du "Nato brown" et du "Flat brown".  Une fois bien sèches, j'ai appliqué sur ces dernières un jus de "Terre de Sienne" (Mélange très liquide de cette peinture à l'huile et d'essence "F"). En vue de donner un aspect poussiéreux, j'ai appliqué avec parcimonie deux couleurs de pastels secs aux endroits clefs.  Enfin, le tout a été recouvert d'un vernis mat de type liquide de nettoyage pour sol tout en évitant les parties vitrées. C'est tout!

Matériel utilisé :
Apprêt :  Mr HOBBY Mr Surfacer 1200 spray - Excellent
Préombrage
 : XF-1 Noir + XF-2 Blanc
Camouflage : XF-52 Flat Earth + XF-59 Desert Yellow / XF-68 Nato Brown +XF-10 Flat Brown
Empoussiérage : Pastels secs
Vernis Mat : Liquide pour les sols de la marque PLIZ - Effet mat/satiné assuré

En conclusion : Grand Merci Philippe.

 

English version

First of all I would like to warmly thank Philippe G without whom this model of the CAESAR would never have seen the light.

Historical background

This truck fitted with an artillery gun commonly named CAESAR (in French CAmion Equipé d'un Système d'ARtillerie) is a French self propelled gun in service with the French army since 2000. It has gradually replaced the Au F1. The gun is a 155 mm caliber and is 8 m long. It is installed on the rear bed of the truck. Widely exported in numerous NATO countries, it is part of the military help to Ukraine in the Russia-Ukraine war started in 2022. KNDS manufacture this gun. It seems that 473 guns have been constructed either in the 6x6 version or the 8x8 one.

The kit

The kit is personal creation of Philippe G who made me discover the 3D printing. The 3D resin is much more sensitive than the plastic and can break provided you apply too much pressure on it. In my humble opinion, I deeply advise against a 3D printed kit for a beginner.

Coming in separate pieces the kit requires some reflection before starting the assembly. Philippe has had the good idea to add to his kit the add-on armor for the cabin. One should note that the parts are very fine and accurate. Some details are impossible to create by hand. Concerning the glue, the CA glue is very useful. When in doubt I first used some white glue to make a dry fit test and removed it with warm water leaving no marks.

I tired to make the antislip coating which is too coarse to my taste. I guess I have made all the hoses and piping. For those interested in, Philippe told me that his latest creations come with all the hoses. To fine-tune I have added some shells coming from the Meng AMX 30 Au F1 model.

The paint

To get something unusual I drew inspiration from the tan and brown camouflage sported by the CAESAR while it was deployed to the UAE during a military exercise.
After a thorough cleansing of the model with lukewarm water and some degreaser, I applied a primer to unify the model. Then I applied a preshading which you all know of by spraying some white and black in the recesses. The use of brown would have been possible too.
Then I sprayed some Flat earth and made some highlights with some Desert Yellow. Concerning the brown color I used the same method with NATO brown and Flat brown. Once the paint was dry I applied a wash of Sienna earth (very liquid mix of oil paint and lighter fluid). In order to create a dusty effect, I sparingly applied pigments of two different shades over the key spots.
Finally the whole model got a coat of mat varnish (floor cleaning liquid) taking care not to touch the glasses. That's all.

Material used :
Primer :  Mr HOBBY Mr Surfacer 1200 spray - Excellent
Preshading
 : XF-1 Black + XF-2 White
Camouflage : XF-52 Flat Earth + XF-59 Desert Yellow / XF-68 Nato Brown +XF-10 Flat Brown
Dust : Dry chalks
Mat Varnish : PLIZ Floor cleaning liquid - Mat-satin effect guaranteed

As a conclusion : a huge thank you to Philippe.

 

 

Click on a thumbnail to see the full sized picture

         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
         
     
         
Index


Last updated: 10/2026